Seakeeper Ride 525

Request a Quote

SKU: 90686 Category:

Underway Stabilization for Boats from 27 to 30 Feet

Seakeeper Ride 525 is a Vessel Attitude Control System for boats from 27 to 30 ft. Two controllers mounted on the transom eliminate up to 70% of underway pitch and roll, for more comfort, control and confidence on the water. Sized between the Seakeeper Ride 450 and 600, it gives boats from 27 to 30 feet the lifting forces to stop the effects of underway pitch and roll.

How it works. The controllers are mounted to the transom below the waterline. Seakeeper’s proprietary inertial sensing hardware and software track how the boat is behaving in all three axes, pitch, roll and yaw, and command the rotary blades to deploy, creating lift at the transom. The blades deploy at up to 300 mm per second and make 100 adjustments every second, so the system counters wave motion significantly faster than conventional trim tabs, before it is felt on board.

Fully automatic. There are no buttons to push and no adjustments to make: turn the key and the system goes to work. Seakeeper’s Trim Command Curve sets the boat to its optimal running angle at any speed, automatic list control keeps the deck level as weight moves around the boat, the heeling angle is adjusted automatically in turns, and a faster hole shot gets the boat on plane sooner. The drivetrain is sealed in a dry, greased environment with no mechanical exposure to salt water.

Installation and power. Seakeeper Ride fits most transoms, on new boats and refits alike, on fiberglass and aluminum monohulls, stepped or non-stepped. The Seakeeper Ride 525 system comprises port and starboard 525 mm controllers, a software module and a distribution module. It is operated from a compatible multifunction display on an NMEA 2000 network with GPS, and a physical keypad is available as an option. Seakeeper gives a power draw of 12 V 4-6 A or 24 V 2-3 A at cruising speeds.

Where it works. Seakeeper Ride works underway, not at rest: it has trim authority from 10 mph, and full stabilization benefits begin at around 20-25 mph. Seakeeper does not design or recommend it for vessels capable of 80 mph or more. It carries Seakeeper’s 24-month limited warranty from delivery, which excludes commercial use. Ask Mastry about fitting Seakeeper Ride to your boat.

  • For boats from 27 to 30 ft
  • Eliminates up to 70% of underway pitch and roll
  • Controls pitch, roll and yaw with 100 adjustments per second
  • Fully automatic, with no buttons to push
  • Two transom-mounted 525 mm controllers
  • Operated from a compatible multifunction display
  • 12 V or 24 V DC supply

Manuals

Installation

Warranty

Product page

Specification Value
For boats 27-30 ft / 8-9 m
Hull types Fiberglass and aluminum monohulls, stepped or non-stepped
Configuration Two controllers per system, one port and one starboard, transom-mounted
Controller size 525 mm
Motions controlled Pitch, roll and yaw, underway
Motion reduction Up to 70% of underway pitch and roll
Operating speed Trim authority from 10 mph; full stabilization from about 20-25 mph
Maximum vessel speed Not designed or recommended for vessels capable of 80 mph or more
Actuation Rotary blades, up to 300 mm per second, 100 adjustments per second
Power draw 12 V 4-6 A or 24 V 2-3 A at cruising speeds
Power supply 12 V or 24 V DC via battery isolation switch or keyswitch; 15 A circuit breaker or fuse
Helm interface Seakeeper-compatible MFD (select Garmin, Raymarine, Simrad, Navico, Lowrance, Furuno, Q Experience, Humminbird and B&G models)
Network NMEA 2000 backbone with GPS; MFD with Ethernet port
System components Port and starboard controllers, software module, distribution module, cables; keypad optional, purchased separately
Maintenance Inspect actuator zincs about every 3 months; freshwater rinse after use
Warranty 24 months from delivery (Seakeeper Ride limited warranty; excludes commercial use)